Quick answer: Zhongxin Data (zhongxindata.hk) supplies used HPE Smart Array P408i-a RAID controllers, the 8-port 12Gb/s SAS internal controller for ProLiant DL380 Gen10 and DL385 Gen10 chassis, together with the related E208i-a variant. Every unit is used, bench-tested on our own test line, and quoted per part number, with a 90-day warranty from delivery. Availability is confirmed per part number in your quote, so send the part number on WhatsApp +86 13068616914 and we will confirm what we can allocate.

Request a quote for this configuration

Chat on WhatsApp +86 13068616914

What the Smart Array P408i-a is used for

The Smart Array P408i-a is the internal SAS RAID controller for HPE ProLiant Gen10 servers that need hardware RAID with cache rather than a pass-through HBA. It drives up to 8 internal 12Gb/s SAS ports from a PCIe 3.0 x8 slot, which is what makes it the natural fit for an 8SFF or 12LFF DL380 Gen10 chassis. Buyers typically come to it in one of three situations:

  • Building out a used DL380 Gen10. A barebone chassis arrives with no controller, and the P408i-a is the internal option that matches the Gen10 backplane. We also supply the chassis itself – see used HPE ProLiant DL380 Gen10 8SFF barebone with P408i-a.
  • Replacing a failed controller. A failed or missing controller in an existing DL380 Gen10 or DL385 Gen10, where the part number determines whether you need the P408i-a or the lower-feature E208i-a.
  • Adding hardware RAID to a chassis that has been running in HBA mode. Where the host OS currently exposes raw drives, an internal Smart Array controller gives you RAID volumes and a cache-backed write path instead.

HPE Smart Array controllers we quote

Availability is confirmed per part number on every line below.

Model Interface and fit What it changes Availability
HPE Smart Array P408i-a 8 x 12Gb/s SAS internal ports, PCIe 3.0 x8, for ProLiant DL380 Gen10 and DL385 Gen10 Hardware RAID with cache in the internal Smart Array slot; cache module and protection state confirmed per unit Confirmed per part number
HPE Smart Array E208i-a 8 x 12Gb/s SAS internal ports, PCIe 3.0 x8, same Gen10 internal slot The lower-feature Smart Array option – confirm against the part number whether the features your workload needs are present Confirmed per part number
P408i-a with DL380 Gen10 8SFF barebone 2U 8SFF DL380 Gen10 chassis with the internal controller fitted Chassis and controller confirmed as one matched set against the part number before quoting Confirmed per part number

Availability: the Smart Array controllers above are quoted per part number. Availability is confirmed per part number when you request a quote, and pricing is quoted for your quantity and destination – there is no public price list and no standing stock claim on this page.

What to confirm before ordering a used Smart Array controller

Smart Array controllers are cheap to get wrong, because the part numbers look interchangeable until you put them in the slot. Four checks cover most of it:

  • Chassis and backplane. The internal Gen10 slot and the drive layout of your chassis decide whether the controller you hold is the right one. We confirm this against the part number.
  • Cache and protection state. Whether the unit carries a cache module, and whether the battery or supercap reports healthy, changes the performance and the write behaviour. We read the state per unit and report it in the quote.
  • Firmware level and mode. The firmware revision each card reports at test time is recorded per unit and written into the quotation, along with the mode agreed for that unit.
  • Connector and port layout. The internal SAS connector and port count have to match the backplane you are plugging into, and a PERC card and a Smart Array card in the same slot are not interchangeable.

For the rest of the controller range, see used Broadcom MegaRAID SAS RAID controllers for the non-HPE side of the market, and used RAID controllers for the full category.

How a used Smart Array controller is tested before it is quoted

Every unit is cleaned, re-flashed and bench-tested on our own test line, then checked for:

  • Controller firmware revision and PCIe enumeration on the target platform
  • Cache module presence and the battery or supercap protection status
  • Drive slot detection and RAID metadata read
  • Cache coherency and throughput verification under load
  • Error log cleared and re-tested after the check

Request an HPE Smart Array quote

Send the controller part number, the chassis model it has to fit and the quantity. We confirm the fit and availability against that part number and quote it for your destination. WhatsApp +86 13068616914, or browse zhongxindata.hk.

+86 13068616914

Frequently Asked Questions

Can an HPE Smart Array P408i-a be fitted to a ProLiant DL380 Gen10?

Yes. The P408i-a is the internal 8-port 12Gb/s SAS controller option for the DL380 Gen10 and DL385 Gen10 chassis, so it drops into the internal Smart Array slot of an 8SFF or 12LFF DL380 Gen10 without a separate expansion card. The one thing that has to match is the backplane – confirm the drive layout of the chassis before the controller is ordered, and we check that against the part number for you.

Does the P408i-a come with cache and a cache battery?

That depends on the part number, which is why we quote per part number rather than listing one fixed configuration. Cache-protected variants carry a cache module and a battery or supercap, and the protection state of each unit is read and reported before the unit is quoted. If you need cache-backed RAID rather than a pass-through or RAID-on-chip controller, say so and we confirm the fit against the part number.

How is the firmware level confirmed on a used Smart Array controller?

Per unit, during testing. We record the controller firmware revision the card reports at test time and state it in the quote, so you know the level you are receiving rather than assuming a default. Firmware mode and configuration are agreed against the part number before the order is placed, and whatever is confirmed for that unit is written into the quotation.

Request a quote for this configuration

Chat on WhatsApp +86 13068616914