Request a quote for this configuration
Chat on WhatsApp +86 13068616914
Where the Mellanox Spectrum SN5600 800GbE switch fits
The SN5600 is the 2U member of the Mellanox Spectrum-4 family, and it is a spine-and-leaf platform switch rather than a top-of-rack access switch. With 64 x 800GbE OSFP ports and 51.2 Tb/s of switching capacity in 2U, it is built for the fabric layer that sits between or above leaf tiers in an AI training or inference cluster.
Three deployment details decide whether it is the right switch for your fabric, and all three are confirmed per part number before we quote:
- Optical transceivers are a separate decision. 800GbE ports need 800G-capable optics or the appropriate breakouts, and those are normally quoted separately from the switch. Send your transceiver list and we will check port compatibility against it rather than just supplying the chassis.
- Airflow direction is fixed by the unit. Airflow is part of the part number, so a unit meant for one rack layout is not interchangeable with the other. This is confirmed before the order is placed.
- The network OS has to be consistent across the fabric. Mixed link speeds are normal and the switch negotiates down; two different control planes in one fabric are not.
Mellanox Spectrum SN5600 specifications
| Specification | Value | Availability |
|---|---|---|
| Model | Mellanox Spectrum SN5600 (part number MSN5600) | Confirmed per part number |
| Ports | 64 x 800GbE OSFP | Confirmed per part number |
| Platform | Mellanox Spectrum-4 | Confirmed per part number |
| Form factor | 2U rack | Confirmed per part number |
| Switching capacity | 51.2 Tb/s | Confirmed per part number |
| Forwarding rate | 33.3 Bpps | Confirmed per part number |
| Management port | 1 x 25GbE SFP28 | Confirmed per part number |
| Airflow | Recorded per unit and confirmed against the part number | Confirmed per part number |
Availability: the SN5600 configuration above is quoted per part number. Availability is confirmed per part number when you request a quote, and pricing is quoted for your quantity and destination – there is no public price list and no standing stock claim on this page.
How a used SN5600 is tested before it is quoted
Every unit is cleaned, re-flashed and bench-tested on our own test line, then checked for:
- Port count and link negotiation across every 800GbE port
- Firmware revision as reported by the switch itself
- Optical transceiver link bring-up and error counters
- Fan modules tested under load, so a worn fan is disclosed rather than discovered later
- Management interface access and the 25GbE SFP28 management port
- Power supply loadout and redundancy, where the unit carries it
- Error log cleared and re-tested after the check
Request a Mellanox Spectrum SN5600 quote
Send the part number, the fabric tier you are filling and the quantity, plus your transceiver list if you have one. We confirm the configuration and availability against that part number and quote it for your destination. WhatsApp +86 13068616914, or browse zhongxindata.hk.
+86 13068616914
Frequently Asked Questions
Can a used SN5600 be used in a mixed-speed fabric alongside 400G switches?
Yes, provided the network OS is consistent across the fabric. The SN5600 negotiates down to slower link rates, so a 400G port and an 800G port can sit in the same fabric, but you should not run two different control planes across it. Send us the fabric plan and we will confirm the combination against the part number.
What should I confirm before ordering a used SN5600?
The part number itself, because the port configuration, airflow direction and power supply loadout differ between units in the same family. We confirm the airflow direction, the port count, the firmware level and the optical transceivers against your fabric, and we test every port and fan under load before the unit is quoted.
Request a quote for this configuration